dmesg - Intel Core i7-5557U - Intel Broadwell-U - Intel
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt11-1 (2015-05-24)
Command line: initrd=\debian8.1\initrd ro root=/dev/sda4 deviceloader=8A5F6664-087D-4429-B5F2-23A4126894DF
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000009cf69fff] usable
BIOS-e820: [mem 0x000000009cf6a000-0x000000009d42ffff] reserved
BIOS-e820: [mem 0x000000009d430000-0x00000000a2296fff] usable
BIOS-e820: [mem 0x00000000a2297000-0x00000000a2351fff] reserved
BIOS-e820: [mem 0x00000000a2352000-0x00000000a2377fff] ACPI data
BIOS-e820: [mem 0x00000000a2378000-0x00000000a2ca7fff] ACPI NVS
BIOS-e820: [mem 0x00000000a2ca8000-0x00000000a2ffefff] reserved
BIOS-e820: [mem 0x00000000a2fff000-0x00000000a2ffffff] usable
BIOS-e820: [mem 0x00000000a3800000-0x00000000a7ffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x0000000456ffffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x9be43018-0x9be53057] usable ==> usable
e820: update [mem 0x9be32018-0x9be42857] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
reserve setup_data: [mem 0x0000000000059000-0x000000000009efff] usable
reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x000000009be32017] usable
reserve setup_data: [mem 0x000000009be32018-0x000000009be42857] usable
reserve setup_data: [mem 0x000000009be42858-0x000000009be43017] usable
reserve setup_data: [mem 0x000000009be43018-0x000000009be53057] usable
reserve setup_data: [mem 0x000000009be53058-0x000000009cf69fff] usable
reserve setup_data: [mem 0x000000009cf6a000-0x000000009d42ffff] reserved
reserve setup_data: [mem 0x000000009d430000-0x00000000a2296fff] usable
reserve setup_data: [mem 0x00000000a2297000-0x00000000a2351fff] reserved
reserve setup_data: [mem 0x00000000a2352000-0x00000000a2377fff] ACPI data
reserve setup_data: [mem 0x00000000a2378000-0x00000000a2ca7fff] ACPI NVS
reserve setup_data: [mem 0x00000000a2ca8000-0x00000000a2ffefff] reserved
reserve setup_data: [mem 0x00000000a2fff000-0x00000000a2ffffff] usable
reserve setup_data: [mem 0x00000000a3800000-0x00000000a7ffffff] reserved
reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x0000000456ffffff] usable
efi: EFI v2.40 by American Megatrends
efi: ACPI=0xa2359000 ACPI 2.0=0xa2359000 SMBIOS=0xf05e0 MPS=0xfc970
efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
efi: mem01: type=2, attr=0xf, range=[0x0000000000008000-0x000000000000e000) (0MB)
efi: mem02: type=7, attr=0xf, range=[0x000000000000e000-0x0000000000058000) (0MB)
efi: mem03: type=0, attr=0xf, range=[0x0000000000058000-0x0000000000059000) (0MB)
efi: mem04: type=7, attr=0xf, range=[0x0000000000059000-0x000000000005f000) (0MB)
efi: mem05: type=4, attr=0xf, range=[0x000000000005f000-0x0000000000060000) (0MB)
efi: mem06: type=3, attr=0xf, range=[0x0000000000060000-0x000000000009f000) (0MB)
efi: mem07: type=0, attr=0xf, range=[0x000000000009f000-0x00000000000a0000) (0MB)
efi: mem08: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
efi: mem09: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001f18000) (15MB)
efi: mem10: type=7, attr=0xf, range=[0x0000000001f18000-0x0000000010000000) (224MB)
efi: mem11: type=3, attr=0xf, range=[0x0000000010000000-0x000000001000b000) (0MB)
efi: mem12: type=7, attr=0xf, range=[0x000000001000b000-0x000000007f20d000) (1778MB)
efi: mem13: type=2, attr=0xf, range=[0x000000007f20d000-0x0000000080000000) (13MB)
efi: mem14: type=7, attr=0xf, range=[0x0000000080000000-0x0000000099448000) (404MB)
efi: mem15: type=4, attr=0xf, range=[0x0000000099448000-0x0000000099488000) (0MB)
efi: mem16: type=7, attr=0xf, range=[0x0000000099488000-0x000000009be32000) (41MB)
efi: mem17: type=2, attr=0xf, range=[0x000000009be32000-0x000000009be54000) (0MB)
efi: mem18: type=1, attr=0xf, range=[0x000000009be54000-0x000000009cd84000) (15MB)
efi: mem19: type=4, attr=0xf, range=[0x000000009cd84000-0x000000009cf6a000) (1MB)
efi: mem20: type=6, attr=0x800000000000000f, range=[0x000000009cf6a000-0x000000009d430000) (4MB)
efi: mem21: type=4, attr=0xf, range=[0x000000009d430000-0x000000009d438000) (0MB)
efi: mem22: type=7, attr=0xf, range=[0x000000009d438000-0x000000009d442000) (0MB)
efi: mem23: type=2, attr=0xf, range=[0x000000009d442000-0x000000009d447000) (0MB)
efi: mem24: type=4, attr=0xf, range=[0x000000009d447000-0x00000000a1835000) (67MB)
efi: mem25: type=7, attr=0xf, range=[0x00000000a1835000-0x00000000a1b59000) (3MB)
efi: mem26: type=3, attr=0xf, range=[0x00000000a1b59000-0x00000000a2297000) (7MB)
efi: mem27: type=0, attr=0xf, range=[0x00000000a2297000-0x00000000a2352000) (0MB)
efi: mem28: type=9, attr=0xf, range=[0x00000000a2352000-0x00000000a2378000) (0MB)
efi: mem29: type=10, attr=0xf, range=[0x00000000a2378000-0x00000000a2ca8000) (9MB)
efi: mem30: type=6, attr=0x800000000000000f, range=[0x00000000a2ca8000-0x00000000a2fa3000) (2MB)
efi: mem31: type=5, attr=0x800000000000000f, range=[0x00000000a2fa3000-0x00000000a2fff000) (0MB)
efi: mem32: type=4, attr=0xf, range=[0x00000000a2fff000-0x00000000a3000000) (0MB)
efi: mem33: type=7, attr=0xf, range=[0x0000000100000000-0x0000000457000000) (13680MB)
efi: mem34: type=0, attr=0x0, range=[0x00000000a3800000-0x00000000a8000000) (72MB)
efi: mem35: type=11, attr=0x8000000000000001, range=[0x00000000f8000000-0x00000000fc000000) (64MB)
efi: mem36: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
efi: mem37: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed04000) (0MB)
efi: mem38: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
efi: mem39: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
efi: mem40: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
SMBIOS 2.8 present.
DMI: /NUC5i7RYB, BIOS RYBDWi35.86A.0350.2015.0812.1722 08/12/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x457000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7F80000000 write-back
1 base 0080000000 mask 7FE0000000 write-back
2 base 00A0000000 mask 7FFE000000 write-back
3 base 00A2000000 mask 7FFF000000 write-back
4 base 0100000000 mask 7F00000000 write-back
5 base 0200000000 mask 7E00000000 write-back
6 base 0400000000 mask 7F80000000 write-back
7 base 0460000000 mask 7FE0000000 uncachable
8 base 0458000000 mask 7FF8000000 uncachable
9 base 0457000000 mask 7FFF000000 uncachable
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xa3000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xa3000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcb60-0x000fcb6f] mapped at [ffff8800000fcb60]
Base memory trampoline at [ffff880000096000] 96000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01af4000, 0x01af4fff] PGTABLE
BRK [0x01af5000, 0x01af5fff] PGTABLE
BRK [0x01af6000, 0x01af6fff] PGTABLE
init_memory_mapping: [mem 0x456e00000-0x456ffffff]
[mem 0x456e00000-0x456ffffff] page 2M
BRK [0x01af7000, 0x01af7fff] PGTABLE
init_memory_mapping: [mem 0x454000000-0x456dfffff]
[mem 0x454000000-0x456dfffff] page 2M
init_memory_mapping: [mem 0x400000000-0x453ffffff]
[mem 0x400000000-0x43fffffff] page 1G
[mem 0x440000000-0x453ffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x9cf69fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0x9cdfffff] page 2M
[mem 0x9ce00000-0x9cf69fff] page 4k
init_memory_mapping: [mem 0x9d430000-0xa2296fff]
[mem 0x9d430000-0x9d5fffff] page 4k
[mem 0x9d600000-0xa21fffff] page 2M
[mem 0xa2200000-0xa2296fff] page 4k
BRK [0x01af8000, 0x01af8fff] PGTABLE
BRK [0x01af9000, 0x01af9fff] PGTABLE
init_memory_mapping: [mem 0xa2fff000-0xa2ffffff]
[mem 0xa2fff000-0xa2ffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[mem 0x100000000-0x3ffffffff] page 1G
RAMDISK: [mem 0x7f20d000-0x7fffffff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000A2359000 000024 (v02 INTEL )
ACPI: XSDT 0x00000000A2359090 0000A4 (v01 INTEL NUC5i7RY 0000015E AMI 00010013)
ACPI: FACP 0x00000000A236F050 00010C (v05 INTEL NUC5i7RY 0000015E AMI 00010013)
ACPI: DSDT 0x00000000A23591C8 015E82 (v02 INTEL NUC5i7RY 0000015E INTL 20120913)
ACPI: FACS 0x00000000A2CA6F80 000040
ACPI: APIC 0x00000000A236F160 000084 (v03 INTEL NUC5i7RY 0000015E AMI 00010013)
ACPI: FPDT 0x00000000A236F1E8 000044 (v01 INTEL NUC5i7RY 0000015E AMI 00010013)
ACPI: FIDT 0x00000000A236F230 00009C (v01 INTEL NUC5i7RY 0000015E AMI 00010013)
ACPI: MCFG 0x00000000A236F2D0 00003C (v01 INTEL NUC5i7RY 0000015E MSFT 00000097)
ACPI: HPET 0x00000000A236F310 000038 (v01 INTEL NUC5i7RY 0000015E AMI. 0005000B)
ACPI: SSDT 0x00000000A236F348 000315 (v01 INTEL NUC5i7RY 0000015E INTL 20120913)
ACPI: UEFI 0x00000000A236F660 000042 (v01 INTEL NUC5i7RY 0000015E 00000000)
ACPI: LPIT 0x00000000A236F6A8 000094 (v01 INTEL NUC5i7RY 0000015E 00000000)
ACPI: SSDT 0x00000000A236F740 000C7D (v02 INTEL NUC5i7RY 0000015E INTL 20120913)
ACPI: ASF! 0x00000000A23703C0 0000A0 (v32 INTEL NUC5i7RY 0000015E TFSM 000F4240)
ACPI: SSDT 0x00000000A2370460 000539 (v02 INTEL NUC5i7RY 0000015E INTL 20120913)
ACPI: SSDT 0x00000000A23709A0 000B74 (v02 INTEL NUC5i7RY 0000015E INTL 20120913)
ACPI: SSDT 0x00000000A2371518 005AFE (v02 INTEL NUC5i7RY 0000015E INTL 20120913)
ACPI: DMAR 0x00000000A2377018 0000D4 (v01 INTEL NUC5i7RY 0000015E INTL 00000001)
ACPI: BGRT 0x00000000A23770F0 000038 (v01 INTEL NUC5i7RY 0000015E AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x0000000456ffffff]
Initmem setup node 0 [mem 0x00000000-0x456ffffff]
NODE_DATA [mem 0x456ff8000-0x456ffcfff]
[ffffea0000000000-ffffea000f3fffff] PMD -> [ffff880446600000-ffff8804547fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x456ffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x00057fff]
node 0: [mem 0x00059000-0x0009efff]
node 0: [mem 0x00100000-0x9cf69fff]
node 0: [mem 0x9d430000-0xa2296fff]
node 0: [mem 0xa2fff000-0xa2ffffff]
node 0: [mem 0x100000000-0x456ffffff]
On node 0 totalpages: 4164975
DMA zone: 56 pages used for memmap
DMA zone: 25 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 9009 pages used for memmap
DMA32 zone: 658898 pages, LIFO batch:31
Normal zone: 47880 pages used for memmap
Normal zone: 3502080 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0xa4000000-0xa7ffffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x0])
ACPI: NMI not connected to LINT 1!
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x0])
ACPI: NMI not connected to LINT 1!
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x0])
ACPI: NMI not connected to LINT 1!
ACPI: LAPIC_NMI (acpi_id[0x04] dfl edge lint[0x44])
ACPI: NMI not connected to LINT 1!
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 56
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x9be32000-0x9be32fff]
PM: Registered nosave memory: [mem 0x9be42000-0x9be42fff]
PM: Registered nosave memory: [mem 0x9be43000-0x9be43fff]
PM: Registered nosave memory: [mem 0x9be53000-0x9be53fff]
PM: Registered nosave memory: [mem 0x9cf6a000-0x9d42ffff]
PM: Registered nosave memory: [mem 0xa2297000-0xa2351fff]
PM: Registered nosave memory: [mem 0xa2352000-0xa2377fff]
PM: Registered nosave memory: [mem 0xa2378000-0xa2ca7fff]
PM: Registered nosave memory: [mem 0xa2ca8000-0xa2ffefff]
PM: Registered nosave memory: [mem 0xa3000000-0xa37fffff]
PM: Registered nosave memory: [mem 0xa3800000-0xa7ffffff]
PM: Registered nosave memory: [mem 0xa8000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xa8000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff880456c00000 s80896 r8192 d21504 u524288
pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4108005
Policy zone: Normal
Kernel command line: initrd=\debian8.1\initrd ro root=/dev/sda4 deviceloader=8A5F6664-087D-4429-B5F2-23A4126894DF
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16256684K/16659900K available (5209K kernel code, 946K rwdata, 1832K rodata, 1204K init, 840K bss, 403216K reserved)
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS:33024 nr_irqs:984 16
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
spurious 8259A interrupt: IRQ7.
tsc: Detected 3093.018 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6186.03 BogoMIPS (lpj=12372072)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140424
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Yama: disabled by default; enable with sysctl kernel.yama.*
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000)
ftrace: allocating 21623 entries in 85 pages
dmar: Host address width 39
dmar: DRHD base: 0x000000fed90000 flags: 0x0
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e
dmar: DRHD base: 0x000000fed91000 flags: 0x1
dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
dmar: RMRR base: 0x000000a2efa000 end: 0x000000a2f09fff
dmar: RMRR base: 0x000000a3800000 end: 0x000000a7ffffff
dmar: ANDD device: 2 name: \_SB.PCI0.SDHC
IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
HPET id 0 under DRHD base 0xfed91000
Queued invalidation will be enabled to support x2apic and Intr-remapping.
Your BIOS is broken and requested that x2apic be disabled.
This will slightly decrease performance.
Use 'intremap=no_x2apic_optout' to override BIOS request.
Enabled IRQ remapping in xapic mode
x2apic not enabled, IRQ remapping is in xapic mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-5557U CPU @ 3.10GHz (fam: 06, model: 3d, stepping: 04)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, generic architected perfmon, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (24744.14 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xa2378000-0xa2ca7fff] (9633792 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 18 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880445899400 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880445892000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88044585CE00 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
_OSC request data:1 1f 0
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xa8000000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xfe000000-0xfe113fff]
pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
pci 0000:00:02.0: [8086:162b] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xa9000000-0xa9ffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xaa134000-0xaa137fff 64bit]
pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xaa120000-0xaa12ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xaa13d000-0xaa13d01f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:15a3] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xaa100000-0xaa11ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xaa13b000-0xaa13bfff]
pci 0000:00:19.0: reg 0x18: [io 0x3080-0x309f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xaa130000-0xaa133fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xaa13a000-0xaa13a3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x30d0-0x30d7]
pci 0000:00:1f.2: reg 0x14: [io 0x30c0-0x30c3]
pci 0000:00:1f.2: reg 0x18: [io 0x30b0-0x30b7]
pci 0000:00:1f.2: reg 0x1c: [io 0x30a0-0x30a3]
pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
pci 0000:00:1f.2: reg 0x24: [mem 0xaa139000-0xaa1397ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xaa138000-0xaa1380ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x3040-0x305f]
acpiphp: Slot [1] registered
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [8086:095a] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xaa000000-0xaa001fff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 02]
pci 0000:00:1c.3: bridge window [mem 0xaa000000-0xaa0fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 4 GPEs in block 00 to 7F
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0x9be32018-0x9bffffff]
e820: reserve RAM buffer [mem 0x9be43018-0x9bffffff]
e820: reserve RAM buffer [mem 0x9cf6a000-0x9fffffff]
e820: reserve RAM buffer [mem 0xa2297000-0xa3ffffff]
e820: reserve RAM buffer [mem 0xa3000000-0xa3ffffff]
e820: reserve RAM buffer [mem 0x457000000-0x457ffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [io 0x0a00-0x0a0f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs NTN0530 (active)
system 00:02: [io 0x0680-0x069f] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0x1800-0x18fe] could not be reserved
system 00:02: [io 0x164e-0x164f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:04: [io 0x1854-0x1857] has been reserved
system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:05: [mem 0xff000000-0xffffffff] has been reserved
system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:05: [mem 0xa8010000-0xa801ffff] has been reserved
system 00:05: [mem 0xa8000000-0xa800ffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xfe104000-0xfe104fff] has been reserved
system 00:06: [mem 0xfe106000-0xfe106fff] has been reserved
system 00:06: [mem 0xfe112000-0xfe112fff] has been reserved
system 00:06: [mem 0xfe111000-0xfe111007] has been reserved
system 00:06: [mem 0xfe111014-0xfe111fff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 7 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.3: PCI bridge to [bus 02]
pci 0000:00:1c.3: bridge window [mem 0xaa000000-0xaa0fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xa8000000-0xdfffffff]
pci_bus 0000:00: resource 8 [mem 0xfe000000-0xfe113fff]
pci_bus 0000:02: resource 1 [mem 0xaa000000-0xaa0fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 0 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 14284K (ffff88007f20d000 - ffff880080000000)
dmar: ACPI device "INT3436:00" under DMAR at fed91000 as 00:17.0
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x95448000-0x99448000] (64MB) mapped at [ffff880095448000-ffff880099447fff]
microcode: CPU0 sig=0x306d4, pf=0x40, revision=0x21
microcode: CPU1 sig=0x306d4, pf=0x40, revision=0x21
microcode: CPU2 sig=0x306d4, pf=0x40, revision=0x21
microcode: CPU3 sig=0x306d4, pf=0x40, revision=0x21
microcode: Microcode Update Driver: v2.00 , Peter Oruba
simple-framebuffer simple-framebuffer.0: framebuffer at 0xb0000000, 0x1d5000 bytes, mapped to 0xffffc90005c00000
simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=800x600x32, linelength=3200
Console: switching to colour frame buffer device 100x37
simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
futex hash table entries: 1024 (order: 4, 65536 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1485376640.532:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 31934
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 61
GHES: HEST is not enabled!
Linux agpgart interface v0.103
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
Intel P-state driver initializing.
Intel pstate controlling: cpu 0
Intel pstate controlling: cpu 1
Intel pstate controlling: cpu 2
Intel pstate controlling: cpu 3
ledtrig-cpu: registered to indicate activity on CPUs
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
TCP: cubic registered
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
registered taskstats version 1
rtc_cmos 00:03: setting system clock to 2017-01-25 20:37:21 UTC (1485376641)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 924K (ffff880001519000 - ffff880001600000)
Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
systemd-udevd[70]: starting version 215
random: systemd-udevd urandom read with 34 bits of entropy available
hidraw: raw HID events driver (C) Jiri Kosina
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
ACPI: Fan [FAN0] (off)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
ACPI: Fan [FAN1] (off)
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: Fan [FAN2] (off)
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
ACPI: Fan [FAN3] (off)
ACPI: Fan [FAN4] (off)
PTP clock support registered
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 58 for MSI/MSI-X
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 11 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
usb usb2: SerialNumber: 0000:00:14.0
e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 59 for MSI/MSI-X
ehci-pci: EHCI PCI platform driver
SCSI subsystem initialized
libata version 3.00 loaded.
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) b8:ae:ed:76:f9:85
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xaa13a000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
usb usb3: SerialNumber: 0000:00:1d.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 60 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m2048@0xaa139000 port 0xaa139100 irq 60
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
usb 1-7: new full-speed USB device number 2 using xhci_hcd
usb 1-7: No LPM exit latency info found, disabling LPM.
usb 1-7: New USB device found, idVendor=8087, idProduct=0a2a
usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-10: INTEL SSDSC2BW120H6, RG20, max UDMA/133
ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
usb 3-1: new high-speed USB device number 2 using ehci-pci
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2BW12 RG20 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
random: nonblocking pool is initialized
PM: Starting manual resume from disk
PM: Hibernation image partition 8:7 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
XFS (sda4): Mounting V5 Filesystem
usb 3-1: New USB device found, idVendor=8087, idProduct=8001
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 8 ports detected
XFS (sda4): Ending clean mount
systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
systemd[1]: Detected architecture 'x86-64'.
systemd[1]: Inserted module 'autofs4'
systemd[1]: Set hostname to .
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Starting Remote File Systems (Pre).
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Starting Encrypted Volumes.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Expecting device dev-sda7.device...
systemd[1]: Expecting device dev-sda1.device...
systemd[1]: Expecting device dev-sda2.device...
systemd[1]: Expecting device dev-sda6.device...
systemd[1]: Expecting device dev-sda3.device...
systemd[1]: Starting Root Slice.
systemd[1]: Created slice Root Slice.
systemd[1]: Starting User and Session Slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Starting Delayed Shutdown Socket.
systemd[1]: Listening on Delayed Shutdown Socket.
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting System Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Started File System Check on Root Device.
systemd[1]: Starting system-systemd\x2dfsck.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Starting system-getty.slice.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Starting Increase datagram queue length...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Mounting Debug File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Started Set Up Additional Binary Formats.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Slices.
systemd[1]: Reached target Slices.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Debug File System.
lp: driver loaded but no devices found
systemd[1]: Started Increase datagram queue length.
ppdev: user-space parallel port driver
systemd[1]: Started Create list of required static device nodes for the current kernel.
fuse init (API version 7.23)
systemd[1]: Started Load Kernel Modules.
systemd[1]: Started udev Coldplug all Devices.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounted Configuration File System.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Starting Syslog Socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Journal Service...
systemd[1]: Started Journal Service.
systemd-udevd[192]: starting version 215
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: acpi_idle registered with cpuidle
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
tsc: Refined TSC clocksource calibration: 3092.846 MHz
ACPI Warning: SystemIO range 0x0000000000003040-0x000000000000305f conflicts with OpRegion 0x0000000000003040-0x000000000000304f (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
mei_me 0000:00:16.0: irq 61 for MSI/MSI-X
[drm] Initialized drm 1.1.0 20060810
snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:00:1b.0: irq 62 for MSI/MSI-X
Registered IR keymap rc-rc6-mce
input: Nuvoton w836x7hg Infrared Remote Transceiver as /devices/pnp0/00:01/rc/rc0/input5
rc0: Nuvoton w836x7hg Infrared Remote Transceiver as /devices/pnp0/00:01/rc/rc0
EFI Variables Facility v0.08 2004-May-17
input: PC Speaker as /devices/platform/pcspkr/input/input6
IR RC5(x) protocol handler initialized
[drm] Memory usable by graphics device = 4096M
checking generic (b0000000 1d5000) vs hw (b0000000 10000000)
fb: switching to inteldrmfb from simple
Console: switching to colour dummy device 80x25
Bluetooth: Core ver 2.19
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
pstore: Registered efi as persistent store backend
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
[drm] Replacing VGA console driver
sound hdaudioC1D0: autoconfig: line_outs=1 (0x21/0x0/0x0/0x0/0x0) type:hp
sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC1D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC1D0: mono: mono_out=0x0
sound hdaudioC1D0: inputs:
sound hdaudioC1D0: Mic=0x19
IR NEC protocol handler initialized
Intel(R) Wireless WiFi driver for Linux, in-tree:
Copyright(c) 2003- 2014 Intel Corporation
iwlwifi 0000:02:00.0: enabling device (0000 -> 0002)
iwlwifi 0000:02:00.0: irq 63 for MSI/MSI-X
cfg80211: Calling CRDA to update world regulatory domain
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
AVX2 version of gcm_enc/dec engaged.
IR Sony protocol handler initialized
IR SANYO protocol handler initialized
iwlwifi 0000:02:00.0: Unsupported splx structure
iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-7265-9.ucode (-2)
iwlwifi 0000:02:00.0: Direct firmware load failed with error -2
iwlwifi 0000:02:00.0: Falling back to user helper
IR Sharp protocol handler initialized
IR MCE Keyboard/mouse protocol handler initialized
input: MCE IR Keyboard/Mouse (nuvoton-cir) as /devices/virtual/input/input9
nuvoton_cir: driver has been successfully loaded
i915 0000:00:02.0: irq 64 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
lirc_dev: IR Remote Control driver registered, major 248
rc rc0: lirc_dev: driver ir-lirc-codec (nuvoton-cir) registered at minor = 0
IR LIRC bridge handler initialized
usbcore: registered new interface driver btusb
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
Bluetooth: hci0: read Intel version: 370810011003110e09
Bluetooth: hci0: Intel device is already patched. patch num: 09
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/hdaudioC1D0/input7
iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-7265-8.ucode (-2)
iwlwifi 0000:02:00.0: Direct firmware load failed with error -2
iwlwifi 0000:02:00.0: Falling back to user helper
iTCO_vendor_support: vendor-support=0
iwlwifi 0000:02:00.0: no suitable firmware found!
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860)
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
alg: No test for crc32 (crc32-pclmul)
i915 0000:00:02.0: No connectors reported connected with modes
[drm] Cannot find any crtc or sizes - going 1024x768
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 128x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
Adding 2097148k swap on /dev/sda7. Priority:-1 extents:1 across:2097148k SSFS
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
snd_hda_intel 0000:00:03.0: irq 63 for MSI/MSI-X
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
systemd-journald[190]: Received request to flush runtime journal from PID 1
e1000e 0000:00:19.0: irq 59 for MSI/MSI-X
e1000e 0000:00:19.0: irq 59 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Switched to clocksource tsc
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized